loading
reading
writing
saving
searching
Table saw Powermatic Model-66 - $1,200 (Port Townsend / Hastings)
condition:
good
make / manufacturer:
Powermatic Table Saw
model name / number:
Model 66
size / dimensions:
72″ L x 48″ W x 55″ H
QR Code Link to This Post
No Miter gauge. Vernier adjustment handle needs repair.
Includes a Phase Converter- IN 240V/20-Amp 1-Phase. OUT 120V/9.6 Amp 3-Phase; runs off house circuit.
Includes Easy-Off Power Control emergency shutoff switch, uninstalled.
Electric: 208/230/460 Voltage 60 Cycle 3 Phase
48” Rip Capacity w/ 68” x 28” Table
The Powermatic Model 66 Table Saw was a main stay of woodshops all over and heart of the Powermatic line of quality woodworking tools. Super Smooth Operation - heavy duty, sealed-for-life ball bearings throughout.
Ruggedly Built - heavy gauge reinforced steel cabinet. Basic parts steel or cast iron.
Standard guide rails provide 25" cut to right of blade.
Extra Capacity - 10" blade cuts stock up to 3 1/2" at 90 degrees ranging to 2 1/2" cut at 45 degrees maximum height.
Table: Extra Cut-off Capacity table in front of blade is full 15" at 1" cut. Standard table with extensions measures 28" x 38", accurately machined and reinforced with ribs to hold a true surface. A 4" insert plate provides ample room for removing saw blade or dado head.
T-slots: An excellent safety and accuracy feature, the T-slots prevent miter gauge from falling when making wide cut-offs.
Arbor: The 5/8" arbor is mounted in large searled ball bearings requiring no lubrication and is driven by three A-secion belts for maximum power. Arbor tilts away from rip fence for safer operation.
Rip Fence: Biesemeyer fence precision machined, cast iron fence locks on front and back of two tubular guide bars assuring rigid support. Fence is equipped with a Vernier control; adjustment is accomplished by means of a steel pinion operating in guide bar rack (knob broke off, needs re-welding).
Saw Guard: The rigid saw guard and splitter is fitted with anti-kickback pawls for maximum safety. Guard swings out of the way when not in use.
Motor Mount: An exclusive new trunnion accommodates a standard C-flange motor which mounts on the saw arm pivot shaft and does not place weight on the saw arm. This type of mounting relieves the saw arbor of motor weight, making it very easy to raise and lower the saw blade.
Power Requirements: The saw is designed for motors from 1 1/2 to 3 HP in either 3 or 1 phase. For light and medium work, 1 1'2 to 2 HP is sufficient.
Approx Weight: 600 Lbs. Table removes for easy loading.
Review at-
old-woodworking-tools.net/powermatic-model-66-table-saw.html